立式深孔钻
Your current location : Home >> News >> Company news

hot key wordsKeywords

Contact usContact Us

Guangdong ligong equipment co. LTD

Contact person: ma sheng

Mobile phone: 13544053951 (shenzhen)

QQ: 2424823775

E-mail: 2424823775 @qq.com

Telephone: 0755-28901562

Fax: 0755-28905747

Web:en.ligongmachine.com

Address: workshop 101, building B6, no.33, xinxia avenue, shanxia community, pinghu street, longgang district, shenzhen city


High precision mold top pinhole drilling

2019-12-11 15:27:55
Times

Shenzhen high precision mold

As more and more high precision products, more and more widely used. As an international leading pioneer and manufacturer of CNC precision mould drilling machine, linong technology is also in the forefront of the industry in the research, development and application of high precision mould equipment technology and the precipitation of technology through the accumulation of technical experience.








Characteristics of precision mold: product height and product projection area close to or more than the product width and length of the size, in general, the height of the plastic product is greater than 80MM. The injection process is long, the injection pressure is high, the injection speed is fast. The plastic material itself is required to have low viscosity, good fluidity and good thermal stability. Mold strength and mold location interlock need to focus on the design of the initial requirements of the design engineer on the selection of mold steel and mold strength of the key control. The choice of mold gate and cooling system design, mold temperature control requirements are very high.








The following is from the choice of molding material, mold structure and strength check and injection parameter optimization to share with you li gong technology in the mold top pinhole drilling processing is how to optimize?




1. Selection of molding material: the injection molding material required by the customer in the early stage is chi mei ABS (pa-757). GDM compares the two materials of LG ABS (hg-173) in various aspects through CAE analysis, as shown in the following table:








As can be seen from the above table, the overall feasibility of choosing hg-173 material is better than that of choosing pa-757 material. Because the product has higher requirements on appearance, especially the requirement that the weld line is not visible, it should be selected with good fluidity and allow high mold temperature of the material forming. GDM suggests that hg-173 material should be selected for molding, and oil temperature should be selected for molding conditions.








2. Optimization of mold structure: through ug-nx advanced simulation, the mold strength and fatigue analysis software were used to calculate the better thickness ratio of the mold template, so as to guarantee the life of the mold and lower the cost of the mold. The internal mold is interlocked to ensure the uniform force on the side side of the mold cavity and avoid the force expansion in the process of injection.


label


Guangdong Ligong Equipment Co., Ltd.

Contact person: ma sheng

Mobile phone: 13544053951 (shenzhen)

QQ: 2424823775

E-mail: 2424823775 @qq.com

Telephone: 0755-28901562

Fax: 0755-28905747

Address: workshop 101, building B6, no.33, xinxia avenue, shanxia community, pinghu street, longgang district, shenzhen city


Follow public account
Mobile website